Skip to content
Cosmos AI
Proposed guide

Build a clear broadcast mix

Simple steps to balance audio for a clear, consistent mix.

  1. Step 1: Separate the broadcast mix

    The room and the stream need different balances, so plan a dedicated feed for broadcast.

    • Instruments that are loud in the room, such as drums, often need less level in the stream, while vocals and speech need more.
    • If your desk allows it, use an auxiliary or matrix output for the stream rather than the main room output.
  2. Step 2: Set gain at the source

    Get healthy, consistent input levels before reaching for faders.

    • Sound-check each microphone at the volume people will actually speak or sing.
    • Aim for peaks comfortably below the top of the meter, leaving headroom for louder moments.
    • Label every channel so volunteers can find the right one quickly.
  3. Step 3: Prioritise speech

    Make sure every spoken word is easy to follow for people listening at home.

    • Keep the preacher, readers and announcements a little above the music bed.
    • Use a high-pass filter on speech microphones to reduce rumble and handling noise.
    • Mute microphones that are not in use to keep the mix clean.
  4. Step 4: Monitor on headphones

    Listen to the broadcast feed itself, not the room.

    • Closed-back headphones help you hear what viewers hear, without the room sound getting in the way.
    • Check the mix on a phone or laptop speaker too, since many people watch that way.
  5. Step 5: Keep levels consistent

    Avoid sudden jumps between songs, speech and videos.

    • Check the level of pre-recorded videos during rehearsal and adjust before the service.
    • Note your settings after a good service so the next team can start from the same place.

This is a proposed guide. Steps are general good practice and will be reviewed against released Cosmos AI features before publication. Want to see how it fits your setup? Book a demo.